Ivory white Modular Foot Ring Press on a neutral background
Modular Foot Ring Press kit with interchangeable ring sizes and components
Technical diagram showing the top view and cross section of the Modular Foot Ring Press
Modular Foot Ring Press forming the foot ring of a ceramic bowl

HOW IT WORKS

ONE PRESS. SEVEN CONSISTENT FOOT RINGS.

The selected insert defines the ring that stays raised. The press compresses the clay around it, leaving a precise circular foot ready for refining after the form has dried.

01

CHOOSE THE DIAMETER

Select one of the seven interchangeable inserts: Ø40, Ø50, Ø60, Ø70, Ø80, Ø90 or Ø100 mm.

02

SUPPORT THE FORM

Place the ceramic form upside down and support the clay from the inside so the base remains stable while pressure is applied.

03

PRESS THE FOOT RING

Centre the tool and press evenly. The surrounding surface is compressed while the annular channel leaves a raised foot ring approximately 5 mm wide.

KIT
7 interchangeable rings
DIAMETERS
Ø40–Ø100 mm
INCREMENTS
10 mm
FOOT WIDTH
Approx. 5 mm
Ø60 INSERT
Ø60 outer / Ø49.5 inner
BEST USED ON
Leather-hard clay

Clay body, moisture and pressure can affect the final depth and finish. Test the chosen insert on a sample first, then refine the ring lightly during trimming if needed.